[Tutorial] How To Fake Your Application UDID On iPhone

How To Fake Your Application UDID On iPhone - UDIDFaker Cydia is an application designed to change the application UDID (ID) into the AppStore, but also has a button to change the default back UDID. This application can be used, for example, if you have been blacklisted by the creator of the application, or to be identified as someone else. In this quick tutorial, very helpful, but I will show you how to install and how to use UDIDFaker.

Step by Step How To Fake Your Application UDID On iPhone

For starters, you need two things: a jailbroken iPhone and UDIDFaker 1.01 which can be downloaded from the following address.

Once you have above requirements you can proceed with installation.

Step 1: Rename the file .deb into “1.deb”

Step 2: Copy the .deb in var/mobile/, Launch Terminal and type the following commands:

su then enter

alpine and enter

dpkg -i 1.deb

Step 3: Launch application and choose the application for which you want to change your UDID - How To Fake Your Application UDID On iPhone

[Tutorial] How to Jailbreak Your iPhone 4 On iOS 5.1 Using RedSn0w – Mac OS X

How to Jailbreak Your iPhone 4 On iOS 5.1 Using RedSn0w – Mac OS X - In this tutorial I will show you how to Jailbreak your iPhone 4 iPhone OS 5.1. Before actual tutorial, keep in mind that is tethered jailbreak which means you must connect your iPhone with your Mac and re-run RedSn0w to start the iPhone 4 to full operation every time the iPhone loses power. I would also like to note that this jailbreak does not work on iPhone 4S and iBooks will not function properly until the iPhone Dev-Team to apply a patch that will fix the problem.

Step by Step How to Jailbreak Your iPhone 4 On iOS 5.1 Using RedSn0w – Mac OS X

Step 1: First, you must download RedSn0w 0.9.10b6 on your Mac

Step 2: Once the download is complete from 0.9.10b6 RedSn0w launcher and click the Jailbreak button in the center of the window

Step 3: When the following window, connect your iPhone 4 with the Mac via the USB cable and turn off your iPhone.

Step 4: When ready, click the Next button in current window, starting the process in DFU mode

Step 5: When you click the Next button, simply follow the instructions inside the redsn0w window and continue clicking Next after each step you take on your iPhone (these steps can be found below)

Hold down the power (area) for 3 seconds

Without releasing the power button, also hold down the Start button (bottom center) for 10 seconds

Without releasing the button, the power button but keep the Home button for 15 seconds

Step 6: After successfully entered DFU mode with the iPhone 4, redsn0w will begin preparing for the iPhone 4 Jailbreak

Step 7: Once completed redsn0w is getting ready to Jailbreak your iPhone 4 a new window where you have to specify the options to go with Jailbreak. You can specify an option that you want, but I suggest you choose only install Cydia and click Next

Step 8: Once you click Next the jailbreak process will begin, do not interrupt this process and wait until it's finished. When the iPhone jailbreak process is complete will start and blocked Apple logo. If this happens is because it is a tethered jailbreak, and you have to start with redsn0w work together to make iPhone.

Step 9: To start your iPhone using redsn0w redsn0w lunch again and click the Options button and select additional start button only

Step 10: After you just have to put your iPhone in DFU mode again - How to Jailbreak Your iPhone 4 On iOS 5.1 Using RedSn0w – Mac OS X

iOS Hacker JailBreaks The New iPad On The Day Of Release

iOS Hacker JailBreaks The New iPad On The Day Of Release - Well, I must admit it was very fast. IOS users are expected to lead to regular clique some time before the new iPhone is released. But it seems that these pirates are better than we expected. Right on the day of liberation, the famous pirate IOS @ MuscleNerd said he has already jailbroken the new iPhone!

In such a short time, you could have, of course, make a jailbreak only very basic. However, this will make it very easy for the iPhone Dev-Team to work on your jailbreak, jailbreak and then design a bit stable.

News : iOS Hacker JailBreaks The New iPad On The Day Of Release

There are other reports on the web too, about the jailbreak the new iPhone. It seems that hackers have been eagerly awaiting iOS get their hands on the new tablet and the escape from prison immediately. Another pirate IOS Stefan Esser, also known as i0n1c, released a video of the new iPad saying that he was capable of untethered jailbreak the new iPhone! Indeed, if this is true, it can be a great success in a very short period of time.

Pod2g and his team took time to perform the Untethered Jailbreak iPhone 4S and two iPad. But if an intruder has done the same for the new iPad IOS in a day, which is extraordinary indeed. So far no news on when it will be called jailbreak available. - iOS Hacker JailBreaks The New iPad On The Day Of Release

[Tutorial] How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Mac]

How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Mac]- The iPhone Dev Team and Chronic Dev Team has finally released version 2.0 of absinthe. With the help of this tool, untethered jailbreak can be done on all devices A4 and A5 have been upgraded to iPhone OS 5.1.1. Naturally, all users of IOS were desperate hope that this tool because it allows the use Cydia and allows them to use an unlimited number of extensions and applications outside the App Store.

Step by Step How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Mac]

Here's a simple explanation for you to download and install the 2.0 and wormwood jailbreak your iPhone, iPad, iPod and Mac through. You can view a complete list of devices that are compatible with 2.0 Absinthe here. Remember to restore and save all your device data before starting the jailbreak.

Step 1: Download Absinthe 2.0 for Mac from here.

Step 2: To mount the downloaded dmg file, double click it. Then drag the application of absinthe on the desktop of your Mac

Step 3: To start the application of absinthe, double-click it.

Step 4: You will be asked by Absinthe 2.0 to connect your iDevice to your Mac via USB. You must ensure that there is no access codes or VPN settings enabled on the device when connected to the computer.

Step 5: Now click on the window to start the jailbreak process.

Step 6: Most work is done here. The application itself to continue working, subject to a number of measures, including start jailbreak sending the initial data, sending the final data, waiting for the restart and complete the process.

Step 7: A final screen will tell you that you have completed and that the jailbreak is complete.

Step 8: You will be able to find a few minutes in the Cydia icon on the Springboard, which confirmed the jailbreak. - How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Mac]

[Tutorial] How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Windows]

How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Windows] - Like most users of IOS is well aware, the long awaited and anticipated 2.0 is here Absinthe tool, allowing users to IOS release limits on their Apple devices. All you have to do is download Absinthe 2.0, install it and presto, you can access a plethora of new applications and extensions in your IOS device. The following is a simple tutorial to help you achieve Absinthe jailbreak 2.0 on Windows.

Step by Step How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Windows]

Before starting the jailbreak, do not forget to restore and protect your data. 2.0 While absinthe is completely safe and has some of the brightest minds in the community IOS, you never know what can go wrong and when. And if, instead of risking data loss, you better have a backup before it.

You can view the list of devices that are compatible with wormwood 2.0 to see if your iDevice is particularly compatible. Usually Absinthe 2.0 supports almost all formats A4 and A5 devices running IOS 5.1.1. The following is a step by step to help you perform the jailbreak tool for Windows.

Step 1: Download the latest version of absinthe for Windows from here.

Step 2: Unzip the downloaded file.

Step 3: Enter the file that you extracted and double-click the file named Wormwood-win-2.0.exe.

Step 4: When you click on the file, create another folder called wormwood-win-2.0.

Step 5: Open the new folder and double click the file absinthe.exe

Step 6: The installation and the installation will ask you to connect your iDevice to the computer via USB. You must ensure that there is no access codes or intact VPN settings on your device before connecting to the computer.

Step 7: Once you connect the device, press the escape from prison in the window.

Step 8: This starts the configuration process and will automatically guide you through a series of measures, including the initialization of jailbreak, jailbreak sending the initial data, sending the final data, the expected to restart and complete the process.

Step 9: Once the jailbreak is complete, you will be informed on the window that is done. You should see an icon in Cydia few minutes in the Springboard, confirming the completion of the jailbreak. - How To Jailbreak Your iDevice On iOS 5.1.1 Using Absinthe 2.0 [Windows]